DockRite Roll In Dock

Home » Catalog » Docks » Roll-In Docks » DockRite
DockRite Roll In Dock

DockRite Aluminum Truss Dock

4' x 8' and 4' x 16' Sections

Can be set up as a roll-in or sectional system. The sections come in 8' or 16' lengths. Very modular design. Leg pockets are oversized and welded to eliminate the need for multiple leg sizes and unsightly bracing. The entire frame is welded aluminum with 1" x 2" dual center stringers for extra strength and support. Stainless steel bolts with brass nuts are used for joining sections together and attaching any accessories to a section.

Aluminum Truss Frame with Titan Decking

The Titan Deck panels are a full 1-1/8" thick and have the strength for commercial applications. Grate style decking pattern allows wind and water to pass through the panels. Titan Decking will never rot, warp, dent, splinter, or bend. Never needs painting or staining. Barefoot friendly and stays cool to the touch even in extreme temperatures. A 4 x 4 panel weighs approximately 28 lbs. and is backed by a limited lifetime warranty.

Aluminum Truss Frame with SunWalk Vinyl Decking

The SunWalk panels allow dirt and sand to fall through. This grate style decking is light and durable enough to be screwed down and left on year-round.  Each 4' x 4' panel weighs approximately 25 lbs. and is backed by a 12-year warranty.

Aluminum Truss Frame with Aluminum Decking

The removable 4' x 4' white aluminum panels are 1" thick with a maintenance free baked powder coat. Each panel weighs approximately 28 lbs.

An aluminum roll-in or sectional truss frame can be set up in several different ways to meet your needs or application.  The options for leg support for each section would be a pair of post with pads, post with wheels, screw jack post with pads or screw jack post with wheels.

Traditional Titan Decking

100% polypropylene plastic Titan decking pattern allows wind and water to pass through the panels. Titan Decking will never rot, warp, dent, splinter, or bend. Never needs painting or staining. Barefoot friendly and stays cool to the touch even in extreme temperatures.

Sunwalk 45 Series Decking

Engineered Resin Dock Panels represent a new standard, in durability and cost. Sunwalk 45 series decking has a four-way design that gives you a pleasing, continuous pattern – whether in Straight, “T”, or “L” shaped applications.

Sunwalk Resin Wood Series Decking

The wood beam resin dock panel is the perfect low maintenance, simulated wood product for your next dock. The deep wood grain finish gives you that wood look and feel while being maintenance free and easier to install.

Aluminum Decking

The removable 4' x 4' tan aluminum panels are 1" thick with a maintenance free baked on powder coating. Each panel weighs approximately 28 lbs.

EZ Dock
Docks
Voyager
Docks
ShoreStation
Titan Deck