Looking
for something in particular? Call us, we may have it in stock!
Boat Lift Canopies (Different widths & lengths)
The Pier Pleasure canopy offers a strong, all-welded
frame with sliding end that adjusts for easier tarp
installation & removal. The tarp is secured in
place by a continuous elastic shock cord and s-hooks.
Canopy braces are recommended for 26' or longer.
Click to enlarge
Standard
Canopy
Selections 18-ounce vinyl
Blue Green
Gray Tan White
OR
Waterproof Fabric
Click to enlarge
Full Length
Vinyl Bunks
Adjustable to any boat
hull shape even the in-board
ski boats!
Click to enlarge
Pontoon
Rail Kit
Lifts the pontoon from
under deck and also helps guide the
pontoon
(We use 2"x12"x14'
Cedar Boards)
Click to enlarge
Pontoon
V-Rack
The tubes of your pontoon
rests on the double pontoon v-racks
Click to enlarge
Full Length
Vinyl
Guide-ons
The flared ends
allow for easier entrance into your boat
lift. They are adjustable both
vertically & horizontally.
Click to enlarge
Centering
Guides
Allows you to
position your boat using the rub rail of
your boat.
Click to enlarge
Full-Length
Walkway
Titan vinyl planks
with aluminum frame to make it easier to
walk around your craft. Can be
installed on 1200# Vertical Lifts
Click to enlarge
Lift Mate Motor
Universal Wheel
Drive Motor takes the work out of
lowering & raising your boat on the boat
lift. The Motor is available in 110V or 12V.
Fits all boat lifts up to 5000# capacity
Lift Tech Motor
Is available in 110V or 12V. Fits most
lifts with a wheel. Up to 7000#
capacity
Drop Down
Pendant
allows you to start raising your
boat while being in your boat.
Click to enlarge
Click to
enlarge
Wheel Kit
The
stub axle wheel kit allows you to
install & remove your lift with a little
more ease. Add one pair or two!
Click to enlarge
Lift Screw
Legs
The Lift Screw
Legs makes leveling your Pier Pleasure
boat lift easy.
Using the provided hex bit and cordless
drill, the lift raises & lower quickly &
effortlessly.
Click to enlarge
Lift
Diagonal Step
The all aluminum step with skid
resistant tape will assist you as you
climb from the dock into your boat.
You can adjust the height.
Click to enlarge
Lift Jack
The
Lift Jack
allows you to adjust the boat lift legs
by yourself. Assists with
installing wheel kits and retracting
lift legs. The jack is standard with
a long hook to reach down in the
water.
Photo Gallery
Click photos to
enlarge
PP 50114 Vertical Lift with full vinyl bunks and 2 pairs of vertical guide ons.
PP 50114 Vertical Lift with full vinyl bunks, 24' Canopy with SeaMark Burgandy and one pair of vertical guide ons
PP 5000# capacity vertical boat lift with full vinyl bunks and SeaMark Green Tarp.
PP 70120 Hydraulic Vertical Boat Lift with 24' Canopy with Blue Seamark and solar panel.
PP 40108 Vertical Boat Lift & a PP 40114 Vertical Pontoon Lift with 24' Canopies with Green Seamark and Lift Tech Motors.
PP vertical pontoon lift with pontoon rail kit and Blue SeaMark Tarp.
410 Grand Ave. (Hwy 8)
Box 308
Center
City, MN 55012 (651) 257-4265
Email us at: info@marinedocklift.com
Call Toll Free: 800-314-3625
Copyrightฉ
2005 Marine Dock & Lift
