Click photo to enlarge |
Click photo to enlarge |
Click photo to enlarge |
Click photo to enlarge |
|
Poly wheels,
axle and 9" leg pocket for added support |
Adjustable screw wheels
4 different sizes for height adjustment (Also
available are adjustable screw leg with pad in 3
different sizes |
Infinity leg
pocket with
2" x 2" aluminum post and foot pad |
Galvanized posts
standard with TS-9 dock but aluminum posts are
available |
Look
how easy it is to connect each dock frame!
|
|
Each dock frame comes with 2
dock connectors, carriage head bolts and nuts.
The dock connectors attached using the channel
underneath the dock frame. Once dock
connectors are in place no need to move them
unless you decide to reconfigure your dock.
The next dock section drops into the connector
and then all you need to do is tighten up the
quick connect screws.
|
Marine Dock &
Lift Deck Options
 |
 |
 |
 |
 |
|
|
Yellow Cedar |
Reinforced
Titan Vinyl Deck |
White or
Tan Aluminum |
IPE
Hardwood |
Vertex
Vinyl |
|
Oh my! Look how
easy it is to attach dock accessories!
|
 |
 |
 |
 |
|
Here is your
Quick Connect (QC) bracket |
Take your new
accessories (in this case a vertical bumper)
attached it to the QC bracket with the four
bolts |
Slip the QC
bracket in the top rail of the frame |
Now push the
bottom portion of the QC bracket to the bottom
of the frame and tighten down with "T" handle |
How is the TS-9 dock adjusted for height?
This will depend on the style of wheels you choose.
If you go with the standard posts above dock than you
have an option of purchasing a set of winches to adjust
the dock (which means not getting in the water to
adjust). You would attach the cable on each side
of the dock, get the cables tight and then bend down and
loosen up the set screws on both sides. Adjust
your dock using the winches to crank up or down, bend
down tighten up the screws then pull the winches out and
move to next set of posts. Store away until the
next time.
However, if you choose to go with adjustable screw
wheels than all you need is a 15/16" racket with long
extension to adjust your dock up or down.
