Click photo to enlarge |
Click photo to enlarge |
Click photo to
enlarge |
Adjustable screw wheels
4 different sizes for height adjustment (Also
available are adjustable screw leg with pad in 3
different sizes |
Infinity leg
pocket with
2" x 2" aluminum post and foot pad |
Adjustable screw
leg with pad in 3 different sizes |
Look
how easy it is to connect each dock frame!
|
|
Each dock frame comes with 2
dock connectors, carriage head bolts and nuts.
The dock connectors attach using the channel
underneath the dock frame. Once dock
connectors are in place no need to move them
unless you decide to reconfigure your dock.
The next dock section drops into the connector
and then all you need to do is tighten up the
quick connect screws.
|
Marine Dock &
Lift Deck Options
 |
 |
 |
 |
 |
|
|
Yellow Cedar |
Reinforced
Titan Vinyl Deck |
White or
Tan Aluminum |
IPE
Hardwood |
Vertex
Vinyl |
|
Oh my! Look how
easy it is to attach dock accessories!
|
 |
 |
 |
 |
|
Here is your
Quick Connect (QC) bracket |
Take your new
accessories (in this case a 6 step Steps)
attached each side to a QC bracket with the
bolts |
Slip the QC
bracket in the top rail of the frame |
Now push the
bottom portion of the QC brackets to the bottom
of the frame and tighten down with "T" handles |
How is the RS-7 dock adjusted for height?
If
this dock is to be set up as a roll-in dock system,
let's say a 32' roll-in then the standard set up of this
system would be the first 16' section from shore would have
a set (pair) of infinity leg pockets with 2" x 2"
aluminum legs with pads. This would be adjusted by
loosening up the "T" handle (see photo to left) then
adjust dock up or down and then tighten set screw.
The lake end
section (the 2nd 16' section) would have a set (pair) of
easy adjust legs with wheels. Stand on the dock, take
your 15/16" racket with long extension attach it to the
nut inside leg pocket and adjust up or down.
If you would like a clean look, having no posts sticking
above the dock surface you have the option of using the
easy adjust screw legs with pads along with the easy
adjustable screw wheels. The wheel sections come
in 4 different sizes, super shallow, shallow, standard
and deep. Approximate water depth would be
necessary to assure the right height of your dock.
For the adjustable screw legs with pads there are 3
sizes, shallow, standard and deep.
